|
      |
   |
 |
| Todays birthday cars: |
| 60 years old |
| 30867S116926 |
| 30867S116931 |
| 30837S116946 |
| 30837S116955 |
| 30867S116961 |
| 30867S116987 |
| 30837S117001 |
| 30837S117005 |
| 59 years old |
| 40867S119328 |
| 40867S119361 |
| 58 years old |
| 194675S119372 |
| 194375S119379 |
| 194375S119394 |
| 194675S119395 |
| 194675S119402 |
| 194675S119418 |
| 57 years old |
| 194676S123600 |
| 194676S123622 |
| 194676S123652 |
| 194376S123676 |
| 194676S123677 |
| 56 years old |
| 194677S120335 |
| 194677S120368 |
| 194677S120375 |
| 194677S120401 |
| 194677S120404 |
C2 Registry Weblog: '64 interior restauration |
|
| by Joep Feldmann (607 views) | |
04/05/2008 15:14
|
Close up Technical all okay now! |
04/05/2008 15:13
|
On the bridge For torqueing all bolts to specs |
04/05/2008 15:08
|
First day out 2008 |
03/15/2008 17:40
|
Spring Rear spring derusted and painted. Somehow my spring has 10 leafs? |
03/15/2008 17:36
|
Brakes Rear drum brake parts cleaned and put back in place |
03/15/2008 17:34
|
strut rods installed Strut rods and shocks installed |
02/09/2008 19:02
|
Mounted Mounted both trailing arms with fresh bushings and the original shim setup. Hope it is still within specs |
02/08/2008 18:58
|
Checking Checked the play with a dial indicator. That meant disassembly and reassembly with a different shim setup till both sides were within specs. |
02/08/2008 18:57
|
Assembled After assembly, the spindle flange nut torqued to specification |
02/08/2008 18:55
|
Spindle Then the outer bearing on the spindle. I put the spindles in the fridge overnight to shrink them a little. I dont know if it was thanks to this, but it went pretty well. |
 |
|
