04/05/2008 15:14
|
Close up Technical all okay now! |
04/05/2008 15:13
|
On the bridge For torqueing all bolts to specs |
04/05/2008 15:08
|
First day out 2008
|
03/15/2008 17:40
|
Spring Rear spring derusted and painted.
Somehow my spring has 10 leafs? |
03/15/2008 17:36
|
Brakes Rear drum brake parts cleaned and put back in place |
03/15/2008 17:34
|
strut rods installed Strut rods and shocks installed |
02/09/2008 19:02
|
Mounted Mounted both trailing arms with fresh bushings and the original shim setup. Hope it is still within specs |
02/08/2008 18:58
|
Checking Checked the play with a dial indicator. That meant disassembly and reassembly with a different shim setup till both sides were within specs. |
02/08/2008 18:57
|
Assembled After assembly, the spindle flange nut torqued to specification |
02/08/2008 18:55
|
Spindle Then the outer bearing on the spindle. I put the spindles in the fridge overnight to shrink them a little. I dont know if it was thanks to this, but it went pretty well. |